Thursday, October 7, 2010

Error code C0500, C0501 in Konica Minolta bizhub 210/162/163/211/182

Error code C0500 and C0501 means Fixing unit's temperature abnormality.

How to reset these codes?

To reset Error codes C0500 and C0501, perform the following steps.

1-Turn the machine "OFF".
2-Press the "STOP" button on the basic panel.
3-Keep the button pressed and turn the machine "ON".
4-Do not release the button, until the machine warm up.
5-After few seconds Error code will remove and machine will reset.Basic menu will show no error on  LCD screen.This means error code has been removed and photocopier machine is ready to use.

39 comments:

  1. code machine copier bizhub 250 -c2557

    ReplyDelete
  2. minolta dialta di250
    error code:c1300

    ReplyDelete
  3. Dear all i got error code COF32 then i change Developer also but error can not be remove then what can i do next???

    ReplyDelete
  4. nguyễn thái hùng đã bình luận về trang này . chính sát OK

    ReplyDelete
  5. Nice Post ! I am very thankful the person who provide solution of this problem. your blog is so helpful keep it good work.bizhub konica minolta

    ReplyDelete
  6. I have a Konica Minolta bizhub 1250. with errolr code c-3906?
    how can ui clear it

    ReplyDelete
  7. i have a konica minolta bizhub 211 when i print or scan the paper print will come like top side is good but the bottom side is very fent what is the problem.

    ReplyDelete
  8. I've konica minolta di-351. This method is not working on it. If there is a diffrance way to fix it. So please discribe it here. Thanks in advance.

    ReplyDelete
  9. Jamiu wyczyść powrót toneru, wymień developer i zrób inicialiacje w F8

    ReplyDelete
  10. malfunctioning appears on the screen every time with a red beep sound. Doesnt photocopy at all.plz help


    ReplyDelete
  11. Guys help me. I want the user code to mix the toner and developer, I'm using Konica Minolta B210.

    ReplyDelete
  12. This comment has been removed by the author.

    ReplyDelete
  13. I have error messege COF32 for Bizhub 211, what should I do?

    ReplyDelete
  14. can u help me, how to reset konica minolta bizhub 163, i wan to rollback all the setting.. just like new...
    plz help me,,, send me email
    dwiyanaputra82@gmail.com

    ReplyDelete
  15. thank u very much that's working with Konica Minolta bizhub 211
    thank u again

    ReplyDelete
  16. can u help me
    i am using bizhub di2010, paper jam in heating unit can u tell me solution of this problem

    ReplyDelete
  17. Pls how do I remove this trouble code c2259 konica Minolta C451

    ReplyDelete
  18. valeu esse modo funcionou perfeitamente.

    ReplyDelete
  19. Pls how do I remove this trouble code c0070 konica Minolta bizhub 163

    ReplyDelete
  20. Pls how do I remove this trouble code c0070 konica Minolta bizhub 163

    ReplyDelete
    Replies
    1. The toner sensor is probably dirty.It's a pulse sensor on the toner bottle holder

      Delete
    2. The toner sensor is probably dirty.It's a pulse sensor on the toner bottle holder

      Delete
  21. C0000 MY KONICA MINOLTA BIZHUB 163V

    ReplyDelete
    Replies
    1. Might be due to over load from imaging unit, fuser unit or main drive.

      Delete
    2. Might be due to over load from imaging unit, fuser unit or main drive.

      Delete
  22. BIZHUB 211 displays error C0501 for low fusing temperature. The sub and main thermistors are ok. The thermal fuse and both heater lamps ok. The weather conditions very cold in the mornings.The subheater lamp isn't coming on though. Where else should l check?

    ReplyDelete
  23. BIZHUB 211 displays error C0501 for low fusing temperature. The sub and main thermistors are ok. The thermal fuse and both heater lamps ok. The weather conditions very cold in the mornings.The subheater lamp isn't coming on though. Where else should l check?

    ReplyDelete
  24. 2001 iD DEVELOP displays error C0500. I did the reset as as illustrated but the error persisted. What else can i do?

    ReplyDelete